Pages

▼

Pages

▼

Oct 1, 2011

Airtel and Reliance PC Trick With DENvpn For Both 3G and 2G {Exclusive}

After my lots of VPN tricks Like MuacolytesVPN , RaptorVpn, Ultrasurf , HotSpot Shield and many more for Airtel and Reliance , Now im back with new DENvpn trick for Both Reliance and Airtel Users

Airtel Users
Use APN as airtelgprs.com while connecting the phone to the PC
Keep balance less than 30 paise

Reliance Users
Use rcommms APN (mms APN in some states)
Keep low balance

Steps to Follow
  1. Download DENvpn.zip from below link.
  2. Register a free Trial here http://www.denvpn.com/free_trial.php .
  3. You will get your username and password to your mailbox.
  4. Now Extract the downloaded Files Using the Zip password as hackers333
  5. Open the "Data" folder and then open "Config" folder and open the pass.txt with notepad and enter your username and password as shown in below image.
  6. Now start the OpenVPNPortable.exe as the Administrator.
  7. Click yes if it ask you to install the TAP drivers.
  8. It will open and will be minimized to the system tray, Right click on it and click Connect (refer image).
  9. Wait for 2-3 minutes it will get automatically connected (see image below).
  10. After a successful connection you will get message that "DENvpn is now connected".
  11. Now start Downloading, Browsing without any other settings, you can also update your antivirus.   
Download DENvpn.zip  via Plunder

Mirror Link
Download DENvpn.zip via Mediafire
Password for zip file is : hackers333

If  you have any problem regarding this trick then please comment, i am always happy to help.
After your 5 days of trial ends Register again new trial with any other email id.

Note: DONT forget to Run DENvpn as Administrator  

Update: 2 oct 2011 
if any one getting error as follow then open the config folder and then open DENvpn.ovpn with notepad and replace the remote split.connectioncarrier.com 1200 to  remote 94.136.39.29 1200 

Sat Oct 01 23:04:13 2011 RESOLVE: Cannot resolve host address: split.connectioncarrier.com: [NO_DATA] The requested name is valid but does not have an IP address.

    97 comments:

    1. 007October 1, 2011 at 9:43 AM

      vpn automatically connect nahi ho raha hai
      pass.txt name ki koi file nahi hai config me
      pls help me what 2 do??????????/

      ReplyDelete
    2. Dhrubadeep DasOctober 1, 2011 at 10:05 AM

      Thanks brother

      ReplyDelete
    3. krupeshOctober 1, 2011 at 11:10 AM

      @007 Bro download the file again and check it properly, Extract it using winrar or 7z, Check the Config folder and u will find there a file named as pass open it with notepad and enter ur username and pass..

      ReplyDelete
    4. krupeshOctober 1, 2011 at 11:14 AM

      @emocity Thanx for ur comment dude!!

      ReplyDelete
    5. JosephOctober 1, 2011 at 12:40 PM

      @krupeshHey its working but when i download any thng it goes to 300kb but after few sec it cmes to 0bytes. Wat to do..? Pls help

      ReplyDelete
    6. krupeshOctober 1, 2011 at 2:51 PM

      @Joseph first tell me from where u tried downloading the ur file??
      Sometimes Speed comes to 0bytes/s when u try to download from sites which do not provide resume supported downloadng like rapidshare or Fileserve
      For downloading from such websites see my previous post abt leeching sites Here

      ReplyDelete
    7. 007October 1, 2011 at 2:57 PM

      @krupesh
      pls give the link to download DEN vpn ZIP.
      there is no txt of pass file in config

      ReplyDelete
    8. krupeshOctober 1, 2011 at 3:11 PM

      @007 Use above plunder download link and use password as hackers333 for extracting the zip file,
      at least tell me the names of file which u can see in the config folder..

      ReplyDelete
    9. Joseph LinoyOctober 1, 2011 at 3:20 PM

      ihave use it nthen also not working pls help me anyway

      ReplyDelete
    10. 007October 1, 2011 at 3:29 PM

      @krupesh
      plunder link was invalid

      ReplyDelete
    11. Joseph LinoyOctober 1, 2011 at 3:30 PM

      hep me krupesh

      ReplyDelete
    12. 007October 1, 2011 at 3:42 PM

      file name is pass.txt

      ReplyDelete
    13. 007October 1, 2011 at 3:47 PM

      pls reply

      ReplyDelete
    14. AnonymousOctober 1, 2011 at 3:56 PM

      cant download ........
      this msg show when i click download in plunder

      ReplyDelete
    15. AnonymousOctober 1, 2011 at 3:58 PM

      Service Unavailable

      HTTP Error 503. The service is unavailable.

      ReplyDelete
    16. 007October 1, 2011 at 4:30 PM

      pls reply?????????????????????????????

      ReplyDelete
    17. krupeshOctober 1, 2011 at 7:19 PM

      if u face the downloading problem with plunder then use Mediafire link for downloading the DENvpn

      ReplyDelete
    18. krupeshOctober 1, 2011 at 7:25 PM

      If anyone has problem while connecting the DenVPn then paste ur complete connection log here , u will find the log in data=>log=> DENvpn.txt, open this text file and copy it and paste it here, so that i can the error

      ReplyDelete
    19. krupeshOctober 1, 2011 at 7:27 PM

      @joseph paste ur connection log here.

      ReplyDelete
    20. yahooOctober 1, 2011 at 7:37 PM

      not working....
      connect nhi ho rha.......

      ReplyDelete
    21. krupeshOctober 1, 2011 at 7:54 PM

      @yahoo Goto data folder,open log folder ,then open the DENvpn.txt file and copy and paste the connection log here, i will tell wat the problem is

      ReplyDelete
    22. NikhilOctober 1, 2011 at 7:59 PM

      g8, working bro thanks man

      ReplyDelete
    23. yahooOctober 1, 2011 at 8:12 PM

      help me .....

      ReplyDelete
    24. krupeshOctober 1, 2011 at 8:31 PM

      @yahoo I already told u to paste ur connection log here to find out ur problem.

      ReplyDelete
    25. MoneyOctober 1, 2011 at 8:33 PM

      anything for DOCOMO ???

      ReplyDelete
    26. krupeshOctober 1, 2011 at 8:38 PM

      @Money Sorry bro, all Docomo tricks r stopped

      ReplyDelete
    27. 007October 1, 2011 at 8:44 PM

      TELL ME BUDDY WHAT 2 DO

      ReplyDelete
    28. 007October 1, 2011 at 8:52 PM

      WHEN I PASTE MY ERROR LOG THE ERROR PUBLISHED BUT WHEN I REFRESH THE ERROR LOG IS NOT THERE

      ReplyDelete
    29. yahooOctober 1, 2011 at 9:03 PM

      007 well said bro maine bhi post kiya tha but ab nhi dikh rha .................
      here is my connection ....

      .
      .
      .Sat Oct 01 20:14:15 2011 OpenVPN 2.2.1 Win32-MSVC++ [SSL] [LZO2] built on Jul 1 2011
      Sat Oct 01 20:14:15 2011 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
      Sat Oct 01 20:14:15 2011 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
      Sat Oct 01 20:14:15 2011 NOTE: --script-security method='system' is deprecated due to the fact that passed parameters will be subject to shell expansion
      Sat Oct 01 20:14:15 2011 LZO compression initialized
      Sat Oct 01 20:14:15 2011 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
      Sat Oct 01 20:14:15 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
      Sat Oct 01 20:14:15 2011 Local Options hash (VER=V4): '41690919'
      Sat Oct 01 20:14:15 2011 Expected Remote Options hash (VER=V4): '530fdded'
      Sat Oct 01 20:14:15 2011 UDPv4 link local (bound): [undef]:53
      Sat Oct 01 20:14:15 2011 UDPv4 link remote: 94.136.39.29:1200
      Sat Oct 01 20:14:18 2011 TLS Error: Unroutable control packet received from 94.136.39.29:1200 (si=3 op=P_CONTROL_V1)
      Sat Oct 01 20:14:22 2011 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
      Sat Oct 01 20:14:28 2011 VERIFY OK: depth=1, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funston/CN=Fort-Funston_CA/emailAddress=david@myhost.mydomain
      Sat Oct 01 20:14:28 2011 VERIFY OK: depth=0, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funston/CN=server/emailAddress=david@myhost.mydomain
      Sat Oct 01 20:14:32 2011 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key
      Sat Oct 01 20:14:32 2011 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
      Sat Oct 01 20:14:32 2011 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key
      Sat Oct 01 20:14:32 2011 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
      Sat Oct 01 20:14:32 2011 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA
      Sat Oct 01 20:14:32 2011 [server] Peer Connection Initiated with 94.136.39.29:1200
      Sat Oct 01 20:14:35 2011 AUTH: Received AUTH_FAILED control message
      Sat Oct 01 20:14:35 2011 TCP/UDP: Closing socket
      Sat Oct 01 20:14:35 2011 SIGTERM[soft,auth-failure] received, process exiting

      ReplyDelete
    30. yahooOctober 1, 2011 at 9:07 PM

      ^well said 007 bro maine bhi post kiya tha but ab nhi dikh rha ..................

      ReplyDelete
    31. yahooOctober 1, 2011 at 9:09 PM

      @yahooSat Oct 01 20:14:15 2011 OpenVPN 2.2.1 Win32-MSVC++ [SSL] [LZO2] built on Jul 1 2011
      Sat Oct 01 20:14:15 2011 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
      Sat Oct 01 20:14:15 2011 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
      Sat Oct 01 20:14:15 2011 NOTE: --script-security method='system' is deprecated due to the fact that passed parameters will be subject to shell expansion
      Sat Oct 01 20:14:15 2011 LZO compression initialized
      Sat Oct 01 20:14:15 2011 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
      Sat Oct 01 20:14:15 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
      Sat Oct 01 20:14:15 2011 Local Options hash (VER=V4): '41690919'
      Sat Oct 01 20:14:15 2011 Expected Remote Options hash (VER=V4): '530fdded'
      Sat Oct 01 20:14:15 2011 UDPv4 link local (bound): [undef]:53
      Sat Oct 01 20:14:15 2011 UDPv4 link remote: 94.136.39.29:1200
      Sat Oct 01 20:14:18 2011 TLS Error: Unroutable control packet received from 94.136.39.29:1200 (si=3 op=P_CONTROL_V1)
      Sat Oct 01 20:14:22 2011 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
      Sat Oct 01 20:14:28 2011 VERIFY OK: depth=1, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funston/CN=Fort-Funston_CA/emailAddress=david@myhost.mydomain
      Sat Oct 01 20:14:28 2011 VERIFY OK: depth=0, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funston/CN=server/emailAddress=david@myhost.mydomain
      Sat Oct 01 20:14:32 2011 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key
      Sat Oct 01 20:14:32 2011 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
      Sat Oct 01 20:14:32 2011 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key
      Sat Oct 01 20:14:32 2011 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
      Sat Oct 01 20:14:32 2011 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA
      Sat Oct 01 20:14:32 2011 [server] Peer Connection Initiated with 94.136.39.29:1200
      Sat Oct 01 20:14:35 2011 AUTH: Received AUTH_FAILED control message
      Sat Oct 01 20:14:35 2011 TCP/UDP: Closing socket
      Sat Oct 01 20:14:35 2011 SIGTERM[soft,auth-failure] received, process exiting

      ReplyDelete
    32. krupeshOctober 1, 2011 at 9:21 PM

      @yahoo i got ur log in my mail box
      u r getting this Error its 3rd last line
      Sat Oct 01 20:14:35 2011 AUTH: Received AUTH_FAILED control message

      It means that u have entered the username and password wrong in pass.txt file

      ReplyDelete
    33. 007October 1, 2011 at 9:34 PM

      tell me krupesh what to do

      ReplyDelete
    34. krupeshOctober 1, 2011 at 9:39 PM

      @007 u should run Vpn as admin, or else it will not work.

      ReplyDelete
    35. YogeshOctober 1, 2011 at 9:43 PM

      i had tried 2 time but connection failed then i restarted the PC and it got connected, thanx 4 it

      ReplyDelete
    36. 007October 1, 2011 at 10:46 PM

      WHEN I RESTART I CONNECT AND GOT 2MBPS

      ReplyDelete
    37. 007October 1, 2011 at 10:46 PM

      YE TRICK KAB TAK CHALE GI

      ReplyDelete
    38. navinOctober 1, 2011 at 11:09 PM

      iam getting this error...in mms acess point
      plz hlp



      Sat Oct 01 23:03:59 2011 OpenVPN 2.2.1 Win32-MSVC++ [SSL] [LZO2] built on Jul 1 2011
      Sat Oct 01 23:03:59 2011 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
      Sat Oct 01 23:03:59 2011 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
      Sat Oct 01 23:03:59 2011 NOTE: --script-security method='system' is deprecated due to the fact that passed parameters will be subject to shell expansion
      Sat Oct 01 23:04:00 2011 LZO compression initialized
      Sat Oct 01 23:04:00 2011 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
      Sat Oct 01 23:04:02 2011 RESOLVE: Cannot resolve host address: split.connectioncarrier.com: [NO_DATA] The requested name is valid but does not have an IP address.
      Sat Oct 01 23:04:02 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
      Sat Oct 01 23:04:02 2011 Local Options hash (VER=V4): '41690919'
      Sat Oct 01 23:04:02 2011 Expected Remote Options hash (VER=V4): '530fdded'
      Sat Oct 01 23:04:02 2011 RESOLVE: Cannot resolve host address: split.connectioncarrier.com: [NO_DATA] The requested name is valid but does not have an IP address.
      Sat Oct 01 23:04:08 2011 RESOLVE: Cannot resolve host address: split.connectioncarrier.com: [NO_DATA] The requested name is valid but does not have an IP address.
      Sat Oct 01 23:04:13 2011 RESOLVE: Cannot resolve host address: split.connectioncarrier.com: [NO_DATA] The requested name is valid but does not have an IP address.
      Sat Oct 01 23:04:19 2011 RESOLVE: Cannot resolve host address: split.connectioncarrier.com: [NO_DATA] The requested name is valid but does not have an IP address.
      Sat Oct 01 23:04:24 2011 RESOLVE: Cannot resolve host address: split.connectioncarrier.com: [NO_DATA] The requested name is valid but does not have an IP address.
      Sat Oct 01 23:04:41 2011 RESOLVE: Cannot resolve host address: split.connectioncarrier.com: [NO_DATA] The requested name is valid but does not have an IP address.
      Sat Oct 01 23:04:46 2011 RESOLVE: Cannot resolve host address: split.connectioncarrier.com: [NO_DATA] The requested name is valid but does not have an IP address.
      Sat Oct 01 23:04:51 2011 RESOLVE: Cannot resolve host address: split.connectioncarrier.com: [NO_DATA] The requested name is valid but does not have an IP address.
      Sat Oct 01 23:04:56 2011 RESOLVE: Cannot resolve host address: split.connectioncarrier.com: [NO_DATA] The requested name is valid but does not have an IP address.

      ReplyDelete
    39. krupeshOctober 1, 2011 at 11:36 PM

      @007 According to me it will work for 1-2 weeks, If no. of users increases then trick will be stopped soon
      But u dont worry i will be back with new vpn trick

      ReplyDelete
    40. krupeshOctober 2, 2011 at 11:26 AM

      @navin Make sure that no other VPN should be running on ur PC, I also get same error sometimes but when i Restart the PC and connect it works
      Try restarting the PC, and connect it again it may work for u

      ReplyDelete
    41. JosephOctober 2, 2011 at 11:37 AM

      @krupeshhey i hve wrte my username and pass correct thn also. I can browse but no downloading. When i tried it is downloading at 200kb and suddnly goes to 0bytes. Hlp me

      ReplyDelete
    42. JosephOctober 2, 2011 at 12:05 PM

      Reply, and help

      ReplyDelete
    43. krupeshOctober 2, 2011 at 12:09 PM

      @Joseph u did Everything correctly, mistake is not urs, The problem is about the DENvpn server which can handle 100 users at a time, When more than 100 users uses the DENvpn, the speed goes down to Zero

      ReplyDelete
    44. JosephOctober 2, 2011 at 12:13 PM

      K

      ReplyDelete
    45. AnonymousOctober 2, 2011 at 1:03 PM

      i m having 2 airtel sim one on which there is no balance and another on which i m having
      internet activation for rs 98 now on zero bal sim im not able to connect to the VPN server and on another
      sim i m able to connect to the server of VPN but it deducting from my 1gb balance and also i m not able to use the VPN server plz help...

      ReplyDelete
    46. krupeshOctober 2, 2011 at 2:35 PM

      @Anonymous Mail me ur connection log or post it here

      ReplyDelete
    47. yahooOctober 2, 2011 at 3:09 PM

      oh maine username n pass he nhi dala tha .
      thanks yaar connect ho gya .

      ReplyDelete
    48. AnonymousOctober 2, 2011 at 9:28 PM

      goood work buudy||||||||
      it's working for me.... but in my area 3G network is not available
      is there any method to increase speed... now it's giving ... 7kbps....
      but starts from 73 and comes to 7... why is it so?
      thanx agaain

      ReplyDelete
    49. sabariraja - chennaiOctober 3, 2011 at 12:46 AM

      i got connection failed error ......

      ReplyDelete
    50. krupeshOctober 3, 2011 at 1:43 AM

      @sabariraja - chennai Mail me ur connection log to find out the error

      ReplyDelete
    51. krupeshOctober 3, 2011 at 1:46 AM

      @Anonymous Nothing can be done for speed, i also use 2G wit 9kb/s speed

      ReplyDelete
    52. AnonymousOctober 3, 2011 at 8:09 AM

      how to hack survey page pls tell

      ReplyDelete
    53. napsterOctober 3, 2011 at 10:25 AM

      rcommms say connect nhi ho rha .............
      help

      ReplyDelete
    54. krupeshOctober 3, 2011 at 10:41 AM

      @Anonymous If u r getting surey page then download via mediafire

      ReplyDelete
    55. yahooOctober 3, 2011 at 12:09 PM

      rcommms say connect nhi ho rha ..........
      @krupesh bro yea kya chakkar hai .......
      airtelgprs.com say toh connect ho tha hai reliance(rcommms) say kyu nhi ......

      ReplyDelete
    56. krupeshOctober 4, 2011 at 12:44 AM

      I hav found a new VPN trick, i need some1 to test it before i post it here, Any one interested contact me via Email

      ReplyDelete
    57. yahooOctober 4, 2011 at 1:10 AM

      @krupeshbtaao main test karta hu ......
      waise tum ne test kiya ki nhi ......

      ReplyDelete
    58. krupeshOctober 4, 2011 at 1:35 AM

      @yahoo give me ur email id, i will send u details,
      I hav tested it on airtel 2G, and it works,

      ReplyDelete
    59. yahooOctober 4, 2011 at 2:40 PM

      @krupesh
      my email id -
      sonu.dabangg@rediffmail.com
      id note karne ke baad mera yea post dlt kar dena ....

      ReplyDelete
    60. AnonymousOctober 5, 2011 at 11:59 AM

      @krupesh hey dude im having a big prb.im from north-east and in my place there is no 3G. Im using the VNAP Netbuster wch is giving me very very slow browing speed that it even dont load the google homepage.can you give me a trick for fast browsing speed for AIRTEL.Please help me.
      send the trick in this id
      -pranjyotisarma@rocketmail.com

      ReplyDelete
    61. AnonymousOctober 5, 2011 at 3:09 PM

      sala connect hota hi ja raha h pr connect hi nhi hota
      aakhir kyu???
      plz help master mind....

      ReplyDelete
    62. krupeshOctober 5, 2011 at 4:51 PM

      @Anonymous Mail me ur connection log so that i can find Error.

      ReplyDelete
    63. 007October 5, 2011 at 6:52 PM

      @krupesh
      Thnx
      mera to ab bhi 300 kb/s ki speed ati hai

      ReplyDelete
    64. krupeshOctober 5, 2011 at 7:55 PM

      @007
      Hey wat abt that trick that i gave u 2 test???
      Reply me fast

      ReplyDelete
    65. vivekOctober 5, 2011 at 11:06 PM

      denvpn say pc re start ho rha hai .....aur kuch likha aa rha hai warning typ ..........
      koi aur vpn hai toh do ..........
      bina vpn ka koi trick hai toh btaao yaar ............

      ReplyDelete
    66. krupeshOctober 6, 2011 at 2:26 AM

      @vivek If u want without VPN then Use Proxy.

      ReplyDelete
    67. 007October 8, 2011 at 8:02 PM

      @krupesh
      YA
      THAT TRICK WAS ALSO WORKING

      ReplyDelete
    68. 007October 8, 2011 at 8:03 PM

      BHAI DISCONNECT PROBLEM BAHUT HAI IN BOTH TRICK PLS GIVE SOLUTION

      ReplyDelete
    69. AnonymousOctober 14, 2011 at 12:33 AM

      Thanks It working good

      ReplyDelete
    70. RajOctober 14, 2011 at 11:19 AM

      Fri Oct 14 11:13:03 2011 OpenVPN 2.2.1 Win32-MSVC++ [SSL] [LZO2] built on Jul 1 2011
      Fri Oct 14 11:13:03 2011 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
      Fri Oct 14 11:13:03 2011 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
      Fri Oct 14 11:13:03 2011 NOTE: --script-security method='system' is deprecated due to the fact that passed parameters will be subject to shell expansion
      Fri Oct 14 11:13:04 2011 LZO compression initialized
      Fri Oct 14 11:13:04 2011 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
      Fri Oct 14 11:13:04 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
      Fri Oct 14 11:13:04 2011 Local Options hash (VER=V4): '41690919'
      Fri Oct 14 11:13:04 2011 Expected Remote Options hash (VER=V4): '530fdded'
      Fri Oct 14 11:13:04 2011 UDPv4 link local (bound): [undef]:53
      Fri Oct 14 11:13:04 2011 UDPv4 link remote: 94.136.39.29:1200
      Fri Oct 14 11:13:32 2011 [UNDEF] Inactivity timeout (--ping-restart), restarting
      Fri Oct 14 11:13:32 2011 TCP/UDP: Closing socket
      Fri Oct 14 11:13:32 2011 SIGUSR1[soft,ping-restart] received, process restarting
      Fri Oct 14 11:13:34 2011 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
      Fri Oct 14 11:13:34 2011 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
      Fri Oct 14 11:13:34 2011 NOTE: --script-security method='system' is deprecated due to the fact that passed parameters will be subject to shell expansion
      Fri Oct 14 11:13:34 2011 Re-using SSL/TLS context
      Fri Oct 14 11:13:34 2011 LZO compression initialized
      Fri Oct 14 11:13:34 2011 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
      Fri Oct 14 11:13:34 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
      Fri Oct 14 11:13:34 2011 Local Options hash (VER=V4): '41690919'
      Fri Oct 14 11:13:34 2011 Expected Remote Options hash (VER=V4): '530fdded'
      Fri Oct 14 11:13:34 2011 UDPv4 link local (bound): [undef]:53
      Fri Oct 14 11:13:34 2011 UDPv4 link remote: 94.136.39.29:1200
      Fri Oct 14 11:14:02 2011 [UNDEF] Inactivity timeout (--ping-restart), restarting
      Fri Oct 14 11:14:02 2011 TCP/UDP: Closing socket
      Fri Oct 14 11:14:02 2011 SIGUSR1[soft,ping-restart] received, process restarting
      Fri Oct 14 11:14:04 2011 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
      Fri Oct 14 11:14:04 2011 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
      Fri Oct 14 11:14:04 2011 NOTE: --script-security method='system' is deprecated due to the fact that passed parameters will be subject to shell expansion
      Fri Oct 14 11:14:04 2011 Re-using SSL/TLS context
      Fri Oct 14 11:14:04 2011 LZO compression initialized
      Fri Oct 14 11:14:04 2011 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
      Fri Oct 14 11:14:04 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
      Fri Oct 14 11:14:04 2011 Local Options hash (VER=V4): '41690919'
      Fri Oct 14 11:14:04 2011 Expected Remote Options hash (VER=V4): '530fdded'
      Fri Oct 14 11:14:04 2011 UDPv4 link local (bound): [undef]:53
      Fri Oct 14 11:14:04 2011 UDPv4 link remote: 94.136.39.29:1200

      ReplyDelete
    71. RajOctober 14, 2011 at 11:21 AM

      Bro I have given log information as i m not able to connect. plz give me solution

      ReplyDelete
    72. RajOctober 14, 2011 at 11:29 AM

      bro why u delete the post... why dont u solve my problm

      ReplyDelete
    73. krupeshOctober 14, 2011 at 10:45 PM

      @Raj I didn't delete ur post, it was detected as spam,
      u can try 1 thing by changing the port from 1200 to 443 or 9200

      ReplyDelete
    74. RajOctober 15, 2011 at 1:15 PM

      @krupesh. I tried but unable to establish connection. It get stopped at UDPv4 link remote: 94.136.39.29:1200 and dont go further. Plz help me.

      ReplyDelete
    75. RajOctober 15, 2011 at 1:17 PM

      no trick is working for my airtel number. suggest me which trick i shold use to use airtel 3g.

      ReplyDelete
    76. RajOctober 16, 2011 at 12:01 AM

      bro u r nw online... can u help me now...???

      ReplyDelete
    77. krupeshOctober 16, 2011 at 12:18 PM

      @Raj Sorry for replying so late, i was busy in studying as my exams r going on.

      First try changing the port 1200 to 443 or 9200 by editing the config file.

      ReplyDelete
    78. RajOctober 16, 2011 at 1:53 PM

      i did as u told me, I changed the port but even after it didn't work.. my airtel balance is zero.. but when i recharged my account it worked but my all balance reduced to zero and again facing the same problem

      ReplyDelete
    79. krupeshOctober 16, 2011 at 9:50 PM

      @Raj I think UDP port is blocked in ur state.

      ReplyDelete
    80. RajOctober 16, 2011 at 11:52 PM

      Bro please tell me which trick should I use for the problem i m facing...?? How can i use airtel 3g..??

      ReplyDelete
    81. RajOctober 17, 2011 at 11:21 PM

      Bro please tell me which trick should i use for jharkhand airtel...

      ReplyDelete
    82. RajOctober 19, 2011 at 1:18 AM

      Still I havnt got any reply from your side... I m waiting

      ReplyDelete
    83. krupeshOctober 20, 2011 at 12:20 AM

      @Raj Im trying 2 find something new, just wait for few days

      ReplyDelete
    84. RajOctober 26, 2011 at 9:16 PM

      I am using Google Chrome . After connecting when I try to surf internet , I just able to open few web sites.. and on other websites it shows error message "Error 105 (net::ERR_NAME_NOT_RESOLVED): Unable to resolve the server's DNS address." please help me.

      ReplyDelete
    85. RajOctober 26, 2011 at 9:19 PM

      I m also not able to make download using IDM.

      Please bro help me.

      ReplyDelete
    86. krupeshOctober 27, 2011 at 12:16 AM

      @Raj does this problem happens with this VPN or all the VPNs ???

      ReplyDelete
    87. RajNovember 10, 2011 at 6:21 PM

      Bro I am getting error as given below:

      Thu Nov 10 17:56:11 2011 TAP-Win32 MTU=1500
      Thu Nov 10 17:56:11 2011 Notified TAP-Win32 driver to set a DHCP IP/netmask of 10.8.116.186/255.255.255.252 on interface {F5EF4B1D-7891-42E4-8B01-A8CF4BB93B58} [DHCP-serv: 10.8.116.185, lease-time: 31536000]
      Thu Nov 10 17:56:11 2011 Successful ARP Flush on interface [22] {F5EF4B1D-7891-42E4-8B01-A8CF4BB93B58}
      Thu Nov 10 17:56:11 2011 finger-ON.bat Local Area Connection 6 1500 1542 10.8.116.186 10.8.116.185 init
      89dufpoqidjv, Sponsored by: Duck-1 VPN activates AUTO-FINGERING for better browsing ... ENJOY!
      Windows IP Configuration
      Successfully flushed the DNS Resolver Cache.
      OK!
      OK!
      OK!
      OK!
      Thu Nov 10 17:56:18 2011 Initialization Sequence Completed
      Thu Nov 10 18:00:49 2011 Authenticate/Decrypt packet error: packet HMAC authentication failed

      ReplyDelete
    88. AnonymousNovember 25, 2011 at 11:07 PM

      Can u please tell that after using DENVPN m not connection to garena client(fot dota online game client) it stucks at IP looking up Do u hav Fix Of this pls pls please!!!!!! m need

      ReplyDelete
    89. krupeshNovember 26, 2011 at 3:10 PM

      @Anonymous Garena servers do not give access with VPNs. So u will not be able to connect to Garena. It also doent works with Game-ranger Client

      ReplyDelete
    90. AnonymousDecember 1, 2011 at 1:43 PM

      Thu Dec 01 13:27:09 2011 OpenVPN 2.2.1 Win32-MSVC++ [SSL] [LZO2] built on Jul 1 2011
      Thu Dec 01 13:27:09 2011 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
      Thu Dec 01 13:27:09 2011 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
      Thu Dec 01 13:27:09 2011 NOTE: --script-security method='system' is deprecated due to the fact that passed parameters will be subject to shell expansion
      Thu Dec 01 13:27:10 2011 LZO compression initialized
      Thu Dec 01 13:27:10 2011 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
      Thu Dec 01 13:27:10 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
      Thu Dec 01 13:27:10 2011 Local Options hash (VER=V4): '41690919'
      Thu Dec 01 13:27:10 2011 Expected Remote Options hash (VER=V4): '530fdded'
      Thu Dec 01 13:27:10 2011 UDPv4 link local (bound): [undef]:53
      Thu Dec 01 13:27:10 2011 UDPv4 link remote: 94.136.39.29:1200
      Thu Dec 01 13:27:38 2011 [UNDEF] Inactivity timeout (--ping-restart), restarting
      Thu Dec 01 13:27:38 2011 TCP/UDP: Closing socket
      Thu Dec 01 13:27:38 2011 SIGUSR1[soft,ping-restart] received, process restarting
      Thu Dec 01 13:27:40 2011 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
      Thu Dec 01 13:27:40 2011 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
      Thu Dec 01 13:27:40 2011 NOTE: --script-security method='system' is deprecated due to the fact that passed parameters will be subject to shell expansion
      Thu Dec 01 13:27:40 2011 Re-using SSL/TLS context
      Thu Dec 01 13:27:40 2011 LZO compression initialized
      Thu Dec 01 13:27:40 2011 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
      Thu Dec 01 13:27:40 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
      Thu Dec 01 13:27:40 2011 Local Options hash (VER=V4): '41690919'
      Thu Dec 01 13:27:40 2011 Expected Remote Options hash (VER=V4): '530fdded'
      Thu Dec 01 13:27:40 2011 UDPv4 link local (bound): [undef]:53
      Thu Dec 01 13:27:40 2011 UDPv4 link remote: 94.136.39.29:1200
      Thu Dec 01 13:28:08 2011 [UNDEF] Inactivity timeout (--ping-restart), restarting
      Thu Dec 01 13:28:08 2011 TCP/UDP: Closing socket
      Thu Dec 01 13:28:08 2011 SIGUSR1[soft,ping-restart] received, process restarting
      Thu Dec 01 13:28:10 2011 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
      Thu Dec 01 13:28:10 2011 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
      Thu Dec 01 13:28:10 2011 NOTE: --script-security method='system' is deprecated due to the fact that passed parameters will be subject to shell expansion
      Thu Dec 01 13:28:10 2011 Re-using SSL/TLS context
      Thu Dec 01 13:28:10 2011 LZO compression initialized
      Thu Dec 01 13:28:10 2011 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
      Thu Dec 01 13:28:10 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
      Thu Dec 01 13:28:10 2011 Local Options hash (VER=V4): '41690919'
      Thu Dec 01 13:28:10 2011 Expected Remote Options hash (VER=V4): '530fdded'
      Thu Dec 01 13:28:10 2011 UDPv4 link local (bound): [undef]:53
      Thu Dec 01 13:28:10 2011 UDPv4 link remote: 94.136.39.29:1200

      ReplyDelete
    91. AnonymousDecember 1, 2011 at 1:46 PM

      krupesh help me out .......im using reliance sim

      ReplyDelete
    92. AnonymousDecember 1, 2011 at 1:47 PM

      I have posted error message but it does not show

      ReplyDelete
    93. krupeshDecember 1, 2011 at 6:33 PM

      @Anonymous Its no more working with reliance.

      ReplyDelete
    94. AnonymousDecember 1, 2011 at 11:01 PM

      thks .....dude it works great with airtel

      ReplyDelete
    95. AnonymousDecember 17, 2011 at 12:46 AM

      kurpesh jab main denvpn install kar raha hu to wo intall to ho raha hai par wo system try main aisa icon bana nahi aaraha hai jaisa scearn shot main hai.......ek cross mark aaraha hai

      hael me..........

      ReplyDelete
    96. AnonymousFebruary 1, 2012 at 11:10 PM

      bro it's working. bt i get only 10kbps speed.. pls help

      ReplyDelete
    97. AnonymousMarch 12, 2012 at 12:17 PM

      Any trick for AIRCEL 2G or 3G?

      ReplyDelete