Oct 1, 2011

Airtel and Reliance PC Trick With DENvpn For Both 3G and 2G {Exclusive}

Do you like this post?
After my lots of VPN tricks Like MuacolytesVPN , RaptorVpn, Ultrasurf , HotSpot Shield and many more for Airtel and Reliance , Now im back with new DENvpn trick for Both Reliance and Airtel Users

Airtel Users
Use APN as airtelgprs.com while connecting the phone to the PC
Keep balance less than 30 paise

Reliance Users
Use rcommms APN (mms APN in some states)
Keep low balance

Steps to Follow
  1. Download DENvpn.zip from below link.
  2. Register a free Trial here http://www.denvpn.com/free_trial.php .
  3. You will get your username and password to your mailbox.
  4. Now Extract the downloaded Files Using the Zip password as hackers333
  5. Open the "Data" folder and then open "Config" folder and open the pass.txt with notepad and enter your username and password as shown in below image.
  6. Now start the OpenVPNPortable.exe as the Administrator.
  7. Click yes if it ask you to install the TAP drivers.
  8. It will open and will be minimized to the system tray, Right click on it and click Connect (refer image).
  9. Wait for 2-3 minutes it will get automatically connected (see image below).
  10. After a successful connection you will get message that "DENvpn is now connected".
  11. Now start Downloading, Browsing without any other settings, you can also update your antivirus.   
Download DENvpn.zip  via Plunder

Mirror Link
Download DENvpn.zip via Mediafire
Password for zip file is : hackers333

If  you have any problem regarding this trick then please comment, i am always happy to help.
After your 5 days of trial ends Register again new trial with any other email id.

Note: DONT forget to Run DENvpn as Administrator  

Update: 2 oct 2011 
if any one getting error as follow then open the config folder and then open DENvpn.ovpn with notepad and replace the remote split.connectioncarrier.com 1200 to  remote 94.136.39.29 1200 

Sat Oct 01 23:04:13 2011 RESOLVE: Cannot resolve host address: split.connectioncarrier.com: [NO_DATA] The requested name is valid but does not have an IP address.
    Get Free Updates:
    *Get All Updates From us To your Email Account For Free*

    99 comments:

    007 said... [Reply]

    vpn automatically connect nahi ho raha hai
    pass.txt name ki koi file nahi hai config me
    pls help me what 2 do??????????/

    Dhrubadeep Das said... [Reply]

    Thanks brother

    krupesh said... [Reply]

    @007 Bro download the file again and check it properly, Extract it using winrar or 7z, Check the Config folder and u will find there a file named as pass open it with notepad and enter ur username and pass..

    krupesh said... [Reply]

    @emocity Thanx for ur comment dude!!

    Joseph said... [Reply]

    @krupeshHey its working but when i download any thng it goes to 300kb but after few sec it cmes to 0bytes. Wat to do..? Pls help

    krupesh said... [Reply]

    @Joseph first tell me from where u tried downloading the ur file??
    Sometimes Speed comes to 0bytes/s when u try to download from sites which do not provide resume supported downloadng like rapidshare or Fileserve
    For downloading from such websites see my previous post abt leeching sites Here

    007 said... [Reply]

    @krupesh
    pls give the link to download DEN vpn ZIP.
    there is no txt of pass file in config

    krupesh said... [Reply]

    @007 Use above plunder download link and use password as hackers333 for extracting the zip file,
    at least tell me the names of file which u can see in the config folder..

    Joseph Linoy said... [Reply]

    ihave use it nthen also not working pls help me anyway

    007 said... [Reply]

    @krupesh
    plunder link was invalid

    Joseph Linoy said... [Reply]

    hep me krupesh

    007 said... [Reply]

    file name is pass.txt

    007 said... [Reply]

    pls reply

    Anonymous said... [Reply]

    cant download ........
    this msg show when i click download in plunder

    Anonymous said... [Reply]

    Service Unavailable

    HTTP Error 503. The service is unavailable.

    007 said... [Reply]

    pls reply?????????????????????????????

    krupesh said... [Reply]

    if u face the downloading problem with plunder then use Mediafire link for downloading the DENvpn

    krupesh said... [Reply]

    If anyone has problem while connecting the DenVPn then paste ur complete connection log here , u will find the log in data=>log=> DENvpn.txt, open this text file and copy it and paste it here, so that i can the error

    krupesh said... [Reply]

    @joseph paste ur connection log here.

    yahoo said... [Reply]

    not working....
    connect nhi ho rha.......

    krupesh said... [Reply]

    @yahoo Goto data folder,open log folder ,then open the DENvpn.txt file and copy and paste the connection log here, i will tell wat the problem is

    Nikhil said... [Reply]

    g8, working bro thanks man

    yahoo said... [Reply]

    help me .....

    krupesh said... [Reply]

    @yahoo I already told u to paste ur connection log here to find out ur problem.

    Money said... [Reply]

    anything for DOCOMO ???

    krupesh said... [Reply]

    @Money Sorry bro, all Docomo tricks r stopped

    007 said... [Reply]

    TELL ME BUDDY WHAT 2 DO

    007 said... [Reply]

    WHEN I PASTE MY ERROR LOG THE ERROR PUBLISHED BUT WHEN I REFRESH THE ERROR LOG IS NOT THERE

    yahoo said... [Reply]

    007 well said bro maine bhi post kiya tha but ab nhi dikh rha .................
    here is my connection ....

    .
    .
    .Sat Oct 01 20:14:15 2011 OpenVPN 2.2.1 Win32-MSVC++ [SSL] [LZO2] built on Jul 1 2011
    Sat Oct 01 20:14:15 2011 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
    Sat Oct 01 20:14:15 2011 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
    Sat Oct 01 20:14:15 2011 NOTE: --script-security method='system' is deprecated due to the fact that passed parameters will be subject to shell expansion
    Sat Oct 01 20:14:15 2011 LZO compression initialized
    Sat Oct 01 20:14:15 2011 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
    Sat Oct 01 20:14:15 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
    Sat Oct 01 20:14:15 2011 Local Options hash (VER=V4): '41690919'
    Sat Oct 01 20:14:15 2011 Expected Remote Options hash (VER=V4): '530fdded'
    Sat Oct 01 20:14:15 2011 UDPv4 link local (bound): [undef]:53
    Sat Oct 01 20:14:15 2011 UDPv4 link remote: 94.136.39.29:1200
    Sat Oct 01 20:14:18 2011 TLS Error: Unroutable control packet received from 94.136.39.29:1200 (si=3 op=P_CONTROL_V1)
    Sat Oct 01 20:14:22 2011 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
    Sat Oct 01 20:14:28 2011 VERIFY OK: depth=1, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funston/CN=Fort-Funston_CA/emailAddress=david@myhost.mydomain
    Sat Oct 01 20:14:28 2011 VERIFY OK: depth=0, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funston/CN=server/emailAddress=david@myhost.mydomain
    Sat Oct 01 20:14:32 2011 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key
    Sat Oct 01 20:14:32 2011 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
    Sat Oct 01 20:14:32 2011 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key
    Sat Oct 01 20:14:32 2011 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
    Sat Oct 01 20:14:32 2011 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA
    Sat Oct 01 20:14:32 2011 [server] Peer Connection Initiated with 94.136.39.29:1200
    Sat Oct 01 20:14:35 2011 AUTH: Received AUTH_FAILED control message
    Sat Oct 01 20:14:35 2011 TCP/UDP: Closing socket
    Sat Oct 01 20:14:35 2011 SIGTERM[soft,auth-failure] received, process exiting

    yahoo said... [Reply]

    ^well said 007 bro maine bhi post kiya tha but ab nhi dikh rha ..................

    yahoo said... [Reply]

    @yahooSat Oct 01 20:14:15 2011 OpenVPN 2.2.1 Win32-MSVC++ [SSL] [LZO2] built on Jul 1 2011
    Sat Oct 01 20:14:15 2011 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
    Sat Oct 01 20:14:15 2011 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
    Sat Oct 01 20:14:15 2011 NOTE: --script-security method='system' is deprecated due to the fact that passed parameters will be subject to shell expansion
    Sat Oct 01 20:14:15 2011 LZO compression initialized
    Sat Oct 01 20:14:15 2011 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
    Sat Oct 01 20:14:15 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
    Sat Oct 01 20:14:15 2011 Local Options hash (VER=V4): '41690919'
    Sat Oct 01 20:14:15 2011 Expected Remote Options hash (VER=V4): '530fdded'
    Sat Oct 01 20:14:15 2011 UDPv4 link local (bound): [undef]:53
    Sat Oct 01 20:14:15 2011 UDPv4 link remote: 94.136.39.29:1200
    Sat Oct 01 20:14:18 2011 TLS Error: Unroutable control packet received from 94.136.39.29:1200 (si=3 op=P_CONTROL_V1)
    Sat Oct 01 20:14:22 2011 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
    Sat Oct 01 20:14:28 2011 VERIFY OK: depth=1, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funston/CN=Fort-Funston_CA/emailAddress=david@myhost.mydomain
    Sat Oct 01 20:14:28 2011 VERIFY OK: depth=0, /C=US/ST=CA/L=SanFrancisco/O=Fort-Funston/CN=server/emailAddress=david@myhost.mydomain
    Sat Oct 01 20:14:32 2011 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key
    Sat Oct 01 20:14:32 2011 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
    Sat Oct 01 20:14:32 2011 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key
    Sat Oct 01 20:14:32 2011 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
    Sat Oct 01 20:14:32 2011 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA
    Sat Oct 01 20:14:32 2011 [server] Peer Connection Initiated with 94.136.39.29:1200
    Sat Oct 01 20:14:35 2011 AUTH: Received AUTH_FAILED control message
    Sat Oct 01 20:14:35 2011 TCP/UDP: Closing socket
    Sat Oct 01 20:14:35 2011 SIGTERM[soft,auth-failure] received, process exiting

    krupesh said... [Reply]

    @yahoo i got ur log in my mail box
    u r getting this Error its 3rd last line
    Sat Oct 01 20:14:35 2011 AUTH: Received AUTH_FAILED control message

    It means that u have entered the username and password wrong in pass.txt file

    007 said... [Reply]

    tell me krupesh what to do

    krupesh said... [Reply]

    @007 u should run Vpn as admin, or else it will not work.

    Yogesh said... [Reply]

    i had tried 2 time but connection failed then i restarted the PC and it got connected, thanx 4 it

    007 said... [Reply]

    WHEN I RESTART I CONNECT AND GOT 2MBPS

    007 said... [Reply]

    YE TRICK KAB TAK CHALE GI

    navin said... [Reply]

    iam getting this error...in mms acess point
    plz hlp



    Sat Oct 01 23:03:59 2011 OpenVPN 2.2.1 Win32-MSVC++ [SSL] [LZO2] built on Jul 1 2011
    Sat Oct 01 23:03:59 2011 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
    Sat Oct 01 23:03:59 2011 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
    Sat Oct 01 23:03:59 2011 NOTE: --script-security method='system' is deprecated due to the fact that passed parameters will be subject to shell expansion
    Sat Oct 01 23:04:00 2011 LZO compression initialized
    Sat Oct 01 23:04:00 2011 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
    Sat Oct 01 23:04:02 2011 RESOLVE: Cannot resolve host address: split.connectioncarrier.com: [NO_DATA] The requested name is valid but does not have an IP address.
    Sat Oct 01 23:04:02 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
    Sat Oct 01 23:04:02 2011 Local Options hash (VER=V4): '41690919'
    Sat Oct 01 23:04:02 2011 Expected Remote Options hash (VER=V4): '530fdded'
    Sat Oct 01 23:04:02 2011 RESOLVE: Cannot resolve host address: split.connectioncarrier.com: [NO_DATA] The requested name is valid but does not have an IP address.
    Sat Oct 01 23:04:08 2011 RESOLVE: Cannot resolve host address: split.connectioncarrier.com: [NO_DATA] The requested name is valid but does not have an IP address.
    Sat Oct 01 23:04:13 2011 RESOLVE: Cannot resolve host address: split.connectioncarrier.com: [NO_DATA] The requested name is valid but does not have an IP address.
    Sat Oct 01 23:04:19 2011 RESOLVE: Cannot resolve host address: split.connectioncarrier.com: [NO_DATA] The requested name is valid but does not have an IP address.
    Sat Oct 01 23:04:24 2011 RESOLVE: Cannot resolve host address: split.connectioncarrier.com: [NO_DATA] The requested name is valid but does not have an IP address.
    Sat Oct 01 23:04:41 2011 RESOLVE: Cannot resolve host address: split.connectioncarrier.com: [NO_DATA] The requested name is valid but does not have an IP address.
    Sat Oct 01 23:04:46 2011 RESOLVE: Cannot resolve host address: split.connectioncarrier.com: [NO_DATA] The requested name is valid but does not have an IP address.
    Sat Oct 01 23:04:51 2011 RESOLVE: Cannot resolve host address: split.connectioncarrier.com: [NO_DATA] The requested name is valid but does not have an IP address.
    Sat Oct 01 23:04:56 2011 RESOLVE: Cannot resolve host address: split.connectioncarrier.com: [NO_DATA] The requested name is valid but does not have an IP address.

    krupesh said... [Reply]

    @007 According to me it will work for 1-2 weeks, If no. of users increases then trick will be stopped soon
    But u dont worry i will be back with new vpn trick

    krupesh said... [Reply]

    @navin Make sure that no other VPN should be running on ur PC, I also get same error sometimes but when i Restart the PC and connect it works
    Try restarting the PC, and connect it again it may work for u

    Joseph said... [Reply]

    @krupeshhey i hve wrte my username and pass correct thn also. I can browse but no downloading. When i tried it is downloading at 200kb and suddnly goes to 0bytes. Hlp me

    Joseph said... [Reply]

    Reply, and help

    krupesh said... [Reply]

    @Joseph u did Everything correctly, mistake is not urs, The problem is about the DENvpn server which can handle 100 users at a time, When more than 100 users uses the DENvpn, the speed goes down to Zero

    Joseph said... [Reply]

    K

    Anonymous said... [Reply]

    i m having 2 airtel sim one on which there is no balance and another on which i m having
    internet activation for rs 98 now on zero bal sim im not able to connect to the VPN server and on another
    sim i m able to connect to the server of VPN but it deducting from my 1gb balance and also i m not able to use the VPN server plz help...

    krupesh said... [Reply]

    @Anonymous Mail me ur connection log or post it here

    yahoo said... [Reply]

    oh maine username n pass he nhi dala tha .
    thanks yaar connect ho gya .

    Anonymous said... [Reply]

    goood work buudy||||||||
    it's working for me.... but in my area 3G network is not available
    is there any method to increase speed... now it's giving ... 7kbps....
    but starts from 73 and comes to 7... why is it so?
    thanx agaain

    sabariraja - chennai said... [Reply]

    i got connection failed error ......

    krupesh said... [Reply]

    @sabariraja - chennai Mail me ur connection log to find out the error

    krupesh said... [Reply]

    @Anonymous Nothing can be done for speed, i also use 2G wit 9kb/s speed

    Anonymous said... [Reply]

    how to hack survey page pls tell

    napster said... [Reply]

    rcommms say connect nhi ho rha .............
    help

    krupesh said... [Reply]

    @Anonymous If u r getting surey page then download via mediafire

    yahoo said... [Reply]

    rcommms say connect nhi ho rha ..........
    @krupesh bro yea kya chakkar hai .......
    airtelgprs.com say toh connect ho tha hai reliance(rcommms) say kyu nhi ......

    krupesh said... [Reply]

    I hav found a new VPN trick, i need some1 to test it before i post it here, Any one interested contact me via Email

    yahoo said... [Reply]

    @krupeshbtaao main test karta hu ......
    waise tum ne test kiya ki nhi ......

    krupesh said... [Reply]

    @yahoo give me ur email id, i will send u details,
    I hav tested it on airtel 2G, and it works,

    yahoo said... [Reply]

    @krupesh
    my email id -
    sonu.dabangg@rediffmail.com
    id note karne ke baad mera yea post dlt kar dena ....

    Anonymous said... [Reply]

    @krupesh hey dude im having a big prb.im from north-east and in my place there is no 3G. Im using the VNAP Netbuster wch is giving me very very slow browing speed that it even dont load the google homepage.can you give me a trick for fast browsing speed for AIRTEL.Please help me.
    send the trick in this id
    -pranjyotisarma@rocketmail.com

    Anonymous said... [Reply]

    sala connect hota hi ja raha h pr connect hi nhi hota
    aakhir kyu???
    plz help master mind....

    krupesh said... [Reply]

    @Anonymous Mail me ur connection log so that i can find Error.

    007 said... [Reply]

    @krupesh
    Thnx
    mera to ab bhi 300 kb/s ki speed ati hai

    krupesh said... [Reply]

    @007
    Hey wat abt that trick that i gave u 2 test???
    Reply me fast

    vivek said... [Reply]

    denvpn say pc re start ho rha hai .....aur kuch likha aa rha hai warning typ ..........
    koi aur vpn hai toh do ..........
    bina vpn ka koi trick hai toh btaao yaar ............

    krupesh said... [Reply]

    @vivek If u want without VPN then Use Proxy.

    007 said... [Reply]

    @krupesh
    YA
    THAT TRICK WAS ALSO WORKING

    007 said... [Reply]

    BHAI DISCONNECT PROBLEM BAHUT HAI IN BOTH TRICK PLS GIVE SOLUTION

    Anonymous said... [Reply]

    Thanks It working good

    Raj said... [Reply]

    Fri Oct 14 11:13:03 2011 OpenVPN 2.2.1 Win32-MSVC++ [SSL] [LZO2] built on Jul 1 2011
    Fri Oct 14 11:13:03 2011 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
    Fri Oct 14 11:13:03 2011 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
    Fri Oct 14 11:13:03 2011 NOTE: --script-security method='system' is deprecated due to the fact that passed parameters will be subject to shell expansion
    Fri Oct 14 11:13:04 2011 LZO compression initialized
    Fri Oct 14 11:13:04 2011 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
    Fri Oct 14 11:13:04 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
    Fri Oct 14 11:13:04 2011 Local Options hash (VER=V4): '41690919'
    Fri Oct 14 11:13:04 2011 Expected Remote Options hash (VER=V4): '530fdded'
    Fri Oct 14 11:13:04 2011 UDPv4 link local (bound): [undef]:53
    Fri Oct 14 11:13:04 2011 UDPv4 link remote: 94.136.39.29:1200
    Fri Oct 14 11:13:32 2011 [UNDEF] Inactivity timeout (--ping-restart), restarting
    Fri Oct 14 11:13:32 2011 TCP/UDP: Closing socket
    Fri Oct 14 11:13:32 2011 SIGUSR1[soft,ping-restart] received, process restarting
    Fri Oct 14 11:13:34 2011 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
    Fri Oct 14 11:13:34 2011 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
    Fri Oct 14 11:13:34 2011 NOTE: --script-security method='system' is deprecated due to the fact that passed parameters will be subject to shell expansion
    Fri Oct 14 11:13:34 2011 Re-using SSL/TLS context
    Fri Oct 14 11:13:34 2011 LZO compression initialized
    Fri Oct 14 11:13:34 2011 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
    Fri Oct 14 11:13:34 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
    Fri Oct 14 11:13:34 2011 Local Options hash (VER=V4): '41690919'
    Fri Oct 14 11:13:34 2011 Expected Remote Options hash (VER=V4): '530fdded'
    Fri Oct 14 11:13:34 2011 UDPv4 link local (bound): [undef]:53
    Fri Oct 14 11:13:34 2011 UDPv4 link remote: 94.136.39.29:1200
    Fri Oct 14 11:14:02 2011 [UNDEF] Inactivity timeout (--ping-restart), restarting
    Fri Oct 14 11:14:02 2011 TCP/UDP: Closing socket
    Fri Oct 14 11:14:02 2011 SIGUSR1[soft,ping-restart] received, process restarting
    Fri Oct 14 11:14:04 2011 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
    Fri Oct 14 11:14:04 2011 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
    Fri Oct 14 11:14:04 2011 NOTE: --script-security method='system' is deprecated due to the fact that passed parameters will be subject to shell expansion
    Fri Oct 14 11:14:04 2011 Re-using SSL/TLS context
    Fri Oct 14 11:14:04 2011 LZO compression initialized
    Fri Oct 14 11:14:04 2011 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
    Fri Oct 14 11:14:04 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
    Fri Oct 14 11:14:04 2011 Local Options hash (VER=V4): '41690919'
    Fri Oct 14 11:14:04 2011 Expected Remote Options hash (VER=V4): '530fdded'
    Fri Oct 14 11:14:04 2011 UDPv4 link local (bound): [undef]:53
    Fri Oct 14 11:14:04 2011 UDPv4 link remote: 94.136.39.29:1200

    Raj said... [Reply]

    Bro I have given log information as i m not able to connect. plz give me solution

    Raj said... [Reply]

    bro why u delete the post... why dont u solve my problm

    krupesh said... [Reply]

    @Raj I didn't delete ur post, it was detected as spam,
    u can try 1 thing by changing the port from 1200 to 443 or 9200

    Raj said... [Reply]

    @krupesh. I tried but unable to establish connection. It get stopped at UDPv4 link remote: 94.136.39.29:1200 and dont go further. Plz help me.

    Raj said... [Reply]

    no trick is working for my airtel number. suggest me which trick i shold use to use airtel 3g.

    Raj said... [Reply]

    bro u r nw online... can u help me now...???

    krupesh said... [Reply]

    @Raj Sorry for replying so late, i was busy in studying as my exams r going on.

    First try changing the port 1200 to 443 or 9200 by editing the config file.

    Raj said... [Reply]

    i did as u told me, I changed the port but even after it didn't work.. my airtel balance is zero.. but when i recharged my account it worked but my all balance reduced to zero and again facing the same problem

    krupesh said... [Reply]

    @Raj I think UDP port is blocked in ur state.

    Raj said... [Reply]

    Bro please tell me which trick should I use for the problem i m facing...?? How can i use airtel 3g..??

    Raj said... [Reply]

    Bro please tell me which trick should i use for jharkhand airtel...

    Raj said... [Reply]

    Still I havnt got any reply from your side... I m waiting

    krupesh said... [Reply]

    @Raj Im trying 2 find something new, just wait for few days

    Raj said... [Reply]

    I am using Google Chrome . After connecting when I try to surf internet , I just able to open few web sites.. and on other websites it shows error message "Error 105 (net::ERR_NAME_NOT_RESOLVED): Unable to resolve the server's DNS address." please help me.

    Raj said... [Reply]

    I m also not able to make download using IDM.

    Please bro help me.

    krupesh said... [Reply]

    @Raj does this problem happens with this VPN or all the VPNs ???

    Raj said... [Reply]

    Bro I am getting error as given below:

    Thu Nov 10 17:56:11 2011 TAP-Win32 MTU=1500
    Thu Nov 10 17:56:11 2011 Notified TAP-Win32 driver to set a DHCP IP/netmask of 10.8.116.186/255.255.255.252 on interface {F5EF4B1D-7891-42E4-8B01-A8CF4BB93B58} [DHCP-serv: 10.8.116.185, lease-time: 31536000]
    Thu Nov 10 17:56:11 2011 Successful ARP Flush on interface [22] {F5EF4B1D-7891-42E4-8B01-A8CF4BB93B58}
    Thu Nov 10 17:56:11 2011 finger-ON.bat Local Area Connection 6 1500 1542 10.8.116.186 10.8.116.185 init
    89dufpoqidjv, Sponsored by: Duck-1 VPN activates AUTO-FINGERING for better browsing ... ENJOY!
    Windows IP Configuration
    Successfully flushed the DNS Resolver Cache.
    OK!
    OK!
    OK!
    OK!
    Thu Nov 10 17:56:18 2011 Initialization Sequence Completed
    Thu Nov 10 18:00:49 2011 Authenticate/Decrypt packet error: packet HMAC authentication failed

    Anonymous said... [Reply]

    Can u please tell that after using DENVPN m not connection to garena client(fot dota online game client) it stucks at IP looking up Do u hav Fix Of this pls pls please!!!!!! m need

    krupesh said... [Reply]

    @Anonymous Garena servers do not give access with VPNs. So u will not be able to connect to Garena. It also doent works with Game-ranger Client

    Anonymous said... [Reply]

    Thu Dec 01 13:27:09 2011 OpenVPN 2.2.1 Win32-MSVC++ [SSL] [LZO2] built on Jul 1 2011
    Thu Dec 01 13:27:09 2011 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
    Thu Dec 01 13:27:09 2011 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
    Thu Dec 01 13:27:09 2011 NOTE: --script-security method='system' is deprecated due to the fact that passed parameters will be subject to shell expansion
    Thu Dec 01 13:27:10 2011 LZO compression initialized
    Thu Dec 01 13:27:10 2011 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
    Thu Dec 01 13:27:10 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
    Thu Dec 01 13:27:10 2011 Local Options hash (VER=V4): '41690919'
    Thu Dec 01 13:27:10 2011 Expected Remote Options hash (VER=V4): '530fdded'
    Thu Dec 01 13:27:10 2011 UDPv4 link local (bound): [undef]:53
    Thu Dec 01 13:27:10 2011 UDPv4 link remote: 94.136.39.29:1200
    Thu Dec 01 13:27:38 2011 [UNDEF] Inactivity timeout (--ping-restart), restarting
    Thu Dec 01 13:27:38 2011 TCP/UDP: Closing socket
    Thu Dec 01 13:27:38 2011 SIGUSR1[soft,ping-restart] received, process restarting
    Thu Dec 01 13:27:40 2011 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
    Thu Dec 01 13:27:40 2011 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
    Thu Dec 01 13:27:40 2011 NOTE: --script-security method='system' is deprecated due to the fact that passed parameters will be subject to shell expansion
    Thu Dec 01 13:27:40 2011 Re-using SSL/TLS context
    Thu Dec 01 13:27:40 2011 LZO compression initialized
    Thu Dec 01 13:27:40 2011 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
    Thu Dec 01 13:27:40 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
    Thu Dec 01 13:27:40 2011 Local Options hash (VER=V4): '41690919'
    Thu Dec 01 13:27:40 2011 Expected Remote Options hash (VER=V4): '530fdded'
    Thu Dec 01 13:27:40 2011 UDPv4 link local (bound): [undef]:53
    Thu Dec 01 13:27:40 2011 UDPv4 link remote: 94.136.39.29:1200
    Thu Dec 01 13:28:08 2011 [UNDEF] Inactivity timeout (--ping-restart), restarting
    Thu Dec 01 13:28:08 2011 TCP/UDP: Closing socket
    Thu Dec 01 13:28:08 2011 SIGUSR1[soft,ping-restart] received, process restarting
    Thu Dec 01 13:28:10 2011 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
    Thu Dec 01 13:28:10 2011 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
    Thu Dec 01 13:28:10 2011 NOTE: --script-security method='system' is deprecated due to the fact that passed parameters will be subject to shell expansion
    Thu Dec 01 13:28:10 2011 Re-using SSL/TLS context
    Thu Dec 01 13:28:10 2011 LZO compression initialized
    Thu Dec 01 13:28:10 2011 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
    Thu Dec 01 13:28:10 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
    Thu Dec 01 13:28:10 2011 Local Options hash (VER=V4): '41690919'
    Thu Dec 01 13:28:10 2011 Expected Remote Options hash (VER=V4): '530fdded'
    Thu Dec 01 13:28:10 2011 UDPv4 link local (bound): [undef]:53
    Thu Dec 01 13:28:10 2011 UDPv4 link remote: 94.136.39.29:1200

    Anonymous said... [Reply]

    krupesh help me out .......im using reliance sim

    Anonymous said... [Reply]

    I have posted error message but it does not show

    krupesh said... [Reply]

    @Anonymous Its no more working with reliance.

    Anonymous said... [Reply]

    thks .....dude it works great with airtel

    Anonymous said... [Reply]

    kurpesh jab main denvpn install kar raha hu to wo intall to ho raha hai par wo system try main aisa icon bana nahi aaraha hai jaisa scearn shot main hai.......ek cross mark aaraha hai

    hael me..........

    Anonymous said... [Reply]

    bro it's working. bt i get only 10kbps speed.. pls help

    Unknown said... [Reply]

    FROM YESTER DAY NIGHT 11.30 EXPATSHIELD BLOCKED IN HYDERABAD ANY HELP

    Anonymous said... [Reply]

    Any trick for AIRCEL 2G or 3G?

    S.Sai Mohan said... [Reply]

    the denvpn website says 404 not found. Therefore cannot obtain username or password. Please provide me with a username and password. I am getting auth fail message since i have no account in denvpn.

    Post a Comment